plain bearings
Plain bearings are used in many industries and across many applications where there is a need to cost-efficiently and reliably meet the challenge of oscillating movements and possible misalignment. From mining and construction equipment, farm and forestry machinery, all the way to forklift trucks and solar power equipment.
A bushing, also known as a bush, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing.Common designs include solid (sleeve and flanged), split, and clenched bushings. A sleeve, split, or clenched bushing is only a "sleeve" of material with an inner diameter (ID), outer diameter (OD), and length. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench (or clinch) across the cut connecting the parts. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD. The flange is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.
- LS SFEW32ES plain bearings
- 20 mm
- 1310 kgf
- 710 mm x 1000 mm x 500 mm LS GEH710HT plain bearings
- 12 mm
- 2150 lbf
- 440 mm x 630 mm x 315 mm LS GEH440HT plain bearings
- Angular Contact Ball Bearing
- 0.0
- LS SQZL5-RS plain bearings
- 0.6250 in
- 1000 lb
- 90 mm x 150 mm x 85 mm LS GEG90ES plain bearings
- Bearings
- 0.0
- 69,85 mm x 120,65 mm x 70,866 mm LS GEGZ69ES-2RS plain bearings
- 30 mm
- 5.8281 in
- LS SIA50ES plain bearings
- 2.1250 in
- 2.1890 in
- LS SFEW25ES plain bearings
- 20 mm
- 38.1 mm
- LS SIR70ES-D plain bearings
- 70 mm
- 2.9900 in
- LS SQYL7-RS plain bearings
- 3/8 in
- PTFE Reinforced POM
- 45 mm x 75 mm x 43 mm LS GEG45N plain bearings
- 0.3125 in
- 7500 lb