plain bearings
Plain bearings are used in many industries and across many applications where there is a need to cost-efficiently and reliably meet the challenge of oscillating movements and possible misalignment. From mining and construction equipment, farm and forestry machinery, all the way to forklift trucks and solar power equipment.
A bushing, also known as a bush, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing.Common designs include solid (sleeve and flanged), split, and clenched bushings. A sleeve, split, or clenched bushing is only a "sleeve" of material with an inner diameter (ID), outer diameter (OD), and length. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench (or clinch) across the cut connecting the parts. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD. The flange is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.
- LS SI20C plain bearings
- 1.0000 in
- 1-5/8 in
- 35 mm x 62 mm x 18 mm LS GAC35S plain bearings
- 1.5000 in
- 15100 lbf
- 88,9 mm x 139,7 mm x 77,775 mm LS GEZ88ES-2RS plain bearings
- 1.2500 in
- 2150 lbf
- 380 mm x 520 mm x 190 mm LS GEC380HT plain bearings
- 3.4375 in
- Cast Iron
- 5 mm x 14 mm x 6 mm LS GE5E plain bearings
- 2.5000 in
- 2.9000 in
- 180 mm x 260 mm x 128 mm LS GEH180XT plain bearings
- 3 in
- 4000 psi
- LS SAK20C plain bearings
- Cylindrical Roller Bearing
- 0.0
- LS SK50ES plain bearings
- 1.1875 in
- 1-7/8 in
- LS SA5E plain bearings
- 1-1/2 in
- Maximum of +225 °F
- 170 mm x 260 mm x 57 mm LS GAC170T plain bearings
- 45 mm
- 18000 lbf
- 25 mm x 62 mm x 16,5 mm LS GX25S plain bearings
- 25 mm
- 2150 lbf
- 115 mm x 180 mm x 98 mm LS GE115XS/K plain bearings
- 3.1875 in
- 3.7500 in