plain bearings
Plain bearings are used in many industries and across many applications where there is a need to cost-efficiently and reliably meet the challenge of oscillating movements and possible misalignment. From mining and construction equipment, farm and forestry machinery, all the way to forklift trucks and solar power equipment.
A bushing, also known as a bush, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing.Common designs include solid (sleeve and flanged), split, and clenched bushings. A sleeve, split, or clenched bushing is only a "sleeve" of material with an inner diameter (ID), outer diameter (OD), and length. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench (or clinch) across the cut connecting the parts. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD. The flange is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.
- 17 mm x 30 mm x 14 mm ISB SI 17 ES plain bearings
- 0.8750 in
- 2680 lbf
- ISB GAC 70 S plain bearings
- 75 mm
- 6750 kgf
- 110 mm x 180 mm x 100 mm ISB GEG 110 ES 2RS plain bearings
- 60 mm
- Powder Coat
- ISB TSF.R 16.1 plain bearings
- 1-1/4 in
- 4000 psi
- 340 mm x 480 mm x 243 mm ISB GE 340 CP plain bearings
- 1.2500 in
- 3460 lbf
- ISB GAC 130 S plain bearings
- Plain
- 2.5000 in
- 20 mm x 40 mm x 25 mm INA GIKFR 20 PB plain bearings
- Induction
- 662 lb
- 22 mm x 42 mm x 28 mm INA GAKFL 22 PB plain bearings
- 3-11/16 in
- 421 kN
- 11,113 mm x 13,494 mm x 9,53 mm INA EGBZ0706-E40 plain bearings
- 1 in
- Maximum of +800 °F
- 160 mm x 260 mm x 135 mm INA GE 160 FW-2RS plain bearings
- Two-Bolt Base
- 38 mm
- INA GE140-DO-2RS plain bearings
- 1.0000 in
- 2680 lbf