plain bearings
Plain bearings are used in many industries and across many applications where there is a need to cost-efficiently and reliably meet the challenge of oscillating movements and possible misalignment. From mining and construction equipment, farm and forestry machinery, all the way to forklift trucks and solar power equipment.
A bushing, also known as a bush, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing.Common designs include solid (sleeve and flanged), split, and clenched bushings. A sleeve, split, or clenched bushing is only a "sleeve" of material with an inner diameter (ID), outer diameter (OD), and length. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench (or clinch) across the cut connecting the parts. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD. The flange is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.
- 100 mm x 210 mm x 51 mm LS GX100S plain bearings
- Two-Bolt Base
- 3.3125 in
- LS SIJ12 plain bearings
- 0.9375 in
- 3150 lbf
- 500 mm x 710 mm x 355 mm LS GEH500HT plain bearings
- 30 mm
- 2000 kgf
- 70 mm x 120 mm x 70 mm LS GEG70ES-2RS plain bearings
- 0.3125 in
- 52100 Bearing Steel
- LS SI15C plain bearings
- Bearings
- 0.0
- LS SIGEW50ES plain bearings
- 3.5000 in
- 39000 lbf
- 40 mm x 68 mm x 40 mm SIGMA GEH 40 ES plain bearings
- 2.4375 in
- 7 in
- 25 mm x 42 mm x 25 mm SIGMA GEG 25 ES plain bearings
- 1.3750 in
- 3.6250 in
- 80 mm x 120 mm x 74 mm SIGMA GEM 80 ES-2RS plain bearings
- 710 mm
- 980000 N