NTN BEARING CORP.OF CANADA LTD.

angular contact ball bearings

Angular contact ball thrust bearings are designed to accommodate both radial and thrust loads with their large thrust carrying capacity being the primary design feature. These bearings are inch series and typically have an angle of contact around 50 degrees. Angular contact ball thrust bearings consist of hardened and ground angular contact plates with dowel pin holes for mounting and a brass cage with precision balls. The single ball path AB series can handle thrust load in one direction only. Largely used at the bottom of vertical shaft applications, this design accommodates large thrust loads while providing center alignment for the shaft. Specific applications are indexing tables and oilfield rotary table bearings.

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

28,575 mm x 71,438 mm x 20,64 mm SIGMA QJM 1.1/8 angular contact ball bearings: Bearing number : 6416; Size (mm) : 80x200x48

45 mm x 100 mm x 39,7 mm SIGMA 3309 D angular contact ball bearings: Bearing number : 90BIH401; Size (mm) : 228.6x304.8x38.1

15,875 mm x 46,038 mm x 15,88 mm SIGMA MJT 5/8 angular contact ball bearings: Bearing number : 6701; Size (mm) : 12x18x4

120 mm x 260 mm x 55 mm SIGMA 7324-B angular contact ball bearings: Bearing number : 6300DDU; Size (mm) : 10x35x11

40 mm x 80 mm x 30,2 mm SIGMA 3208 angular contact ball bearings: Bearing number : NJ326 E; Size (mm) : 130x280x58

95,25 mm x 209,55 mm x 44,45 mm SIGMA QJM 3.3/4 angular contact ball bearings: Bearing number : 6356; Size (mm) : 280x580x108

45 mm x 100 mm x 38,7 mm ZEN S3309 angular contact ball bearings: Bearing number : 6802; Size (mm) : 15x24x5

30 mm x 72 mm x 30,2 mm ZEN S5306 angular contact ball bearings: Bearing number : EX201G2; Size (mm) : 12x47x43.5

30 mm x 42 mm x 10 mm ZEN 3806-2Z angular contact ball bearings: Bearing number : 22348 CCK/W33; Size (mm) : 500x240x155

15 mm x 24 mm x 7 mm ZEN 3802-2RS angular contact ball bearings: Bearing number : 6700; Size (mm) : 10x15x3

5 mm x 14 mm x 7 mm ZEN 30/5-2RS angular contact ball bearings: Bearing number : 6802-2RS C3; Size (mm) : 15x24x5

15 mm x 35 mm x 15,9 mm ZEN 3202 angular contact ball bearings: Bearing number : 6803-2NKE; Size (mm) : 17x26x5